Pic
- 1 - 8
- /
- 8
PIC10F200-I/PG
Ref: PIC10F200-I/PGThe PIC10F200 is a low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS microcontroller by Microchip. It employs a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle (1 µs) except for program branches, which take two cycles. It delivers performance in an order of magnitude higher than competitors in the same price category. The easyto- use and easy to remember instruction set reduces development time significantly.
4,65 € Ver detalles
8 pin DIP, flash based 8bit CMOS PIC controller
Ref: PIC12F629This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip's powerful PIC® MCU architecture into an 8-pin package and features 1 channel comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entrylevel product applications that require field re-programmability
5,40 € Ver detalles
14-pin FLASH-Based 8bit CMOS µcontroller
Ref: PIC16F630-I/PThis powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip's powerful PIC® MCU architecture into a 14-pin package and features 1 comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.
6,95 € Ver detalles
18p DIP FlashPIC 1Kx14 with 128byte EEPROM
Ref: PIC16F627AThis powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 18-pin package and is upwards compatible with the PIC16F627, PIC16C62XA, PIC16C5X and PIC12CXXX devices. The PIC16F627A features 4MHz internal oscillator, 128 bytes of EEPROM data memory, a capture/compare/PWM, a USART, 2 Comparators and a programmable voltage reference that make it ideal for analog/integrated level applications in automotive, industrial, appliances and consumer applications.
8,25 € Ver detalles
PIC18F2450-I/SP
Ref: PIC18F2450-I/SPIdeal for compact, single chip, Full Speed USB applications (12Mbit/s). The Enhanced Flash program memory allows operation when disconnected from the bus and easy field upgrades via the USB port.
13,10 € Ver detalles
40pin 8-bit CMOS FLASH Microcontroller
Ref: PIC16F871-I/PThis powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F871 features 64 bytes of EEPROM data memory, self programming, an ICD, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 additional timers, a capture/compare/PWM functions and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.
13,80 € Ver detalles
32K Enh. Flash USB Microcontroller
Ref: PIC18F2550-I/SPIdeal for low power (nanoWatt) and connectivity applications that benefit from the availability of three serial ports: FS-USB (12 Mbit/s), I²C and SPI (up to 10Mbit/s) and an asynchronous (LIN capable) serial port (EUSART). Large amounts of RAM memory for buffering and Enhanced FLASH program memory make it ideal for embedded control and monitoring applications that require periodic connection with a (legacy free) Personal Computer via USB for data upload/download and/or firmware updates. While operating up to 48 MHz, the PIC18F2550 is also mostly software and hardware compatible with the PIC16C745 Low-Speed USB OTP devices. THE PICSTART® Plus does NOT currently support this device but may support it in the future..
21,20 € Ver detalles
PROGRAMADOR Y DEPURADOR 'IN-CIRCUIT' PARA PICs POR USB
Ref: PICKIT3El PICkit 3 de Microchip utiliza una lógica de depuración en circuito incorporada dentro de cada chip con memoria Flash para proporcionar un depurador y programador de hardware de bajo coste. El MPLAB PICkit 3 permite depurar y programar microcontroladores PIC® y dsPIC® Flash a un precio asequible utilizando la poderosa interfaz gráfica de usuario del MPLAB Entorno de Desarrollo Integrado (IDE). El MPLAB PICkit 3 va conectado al ordenador del diseñador utilizando una interfaz de alta velocidad USB y se puede conectar al objetivo con un conector (RJ-11) de depuración de Microchip (compatible con MPLAB ICD 2, MPLAB ICD 3, y MPLAB REAL ICE). El conector utiliza dos pines de entrada/salida de un dispositivo y la línea de reinicialización para implementar la depuración en circuito y la programación en circuito en Serie. Descargue la última versión del software MPLAB y pide soporte por www.microchip.com. Los microcontroladores PIC soportados están indicados en el software MPLAB.
96,85 € Ver detalles- 1 - 8
- /
- 8
